Aluminum profile panels are modular ceiling decoration panels made from aluminum alloy sheets as the base material. After cutting, bending, and stamping, they are then processed with surface treatment methods such as spraying, roller coating, film covering, and anodizing.
Anodized aluminum panels are made by placing aluminum sheets in corresponding electrolytes (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, and performing electrolysis under specific conditions and an applied current, forming a dense oxide film on the surface of the aluminum plate.
Imitation wood grain heat transfer printing is an advanced surface treatment technology that "replicates" the natural wood grain onto the surface of aluminum
Fluorocarbon powder coating is an advanced surface treatment process in which a solid powder coating containing fluorocarbon resin is uniformly adhered to the aluminum surface through electrostatic adsorption principles, then melted and cured at high temperatures to form a dense, highly durable protective coating.
Taiyuan Aluminum Industry is equipped with a full set of fully automated powder coating production lines from Germany, paired with an integrated pre-treatment system. Polyester powder coating, with its high cost-effectiveness, thick coating, and environmentally friendly, solvent-free coating, is the mainstream surface treatment process for interior decoration and low-rise exterior wall aluminum panels. It delivers stable large-volume orders and is widely used in tooling, stores, and interior decoration projects.
Tailu Aluminum Industry relies on a fully automatic spraying production line in Germany, synchronized with standardized polyester paint spraying processes, focusing on cost-effective surface treatment solutions for indoor and low-rise outdoor aluminum panels, with stable supply and rich colors, widely used in interior decoration, store signage, low-rise exterior walls, steel structure decoration, and other projects
Guangzhou Tailu Aluminum has been deeply involved in aluminum panel surface treatment for over twenty years
Aluminum plate drawing (mechanical drawing) relies on physical grinding with sand belts/nylon brushes to form directional textures on the surface of the plate, presenting a matte metallic satin texture; The industry often uses a combination of wire drawing and anodizing, and the original bare wire drawing aluminum has poor anti-corrosion ability.
Natural stone is certainly noble and elegant, but its application pain points are equally prominent—granite can weigh 5 to 8 times more than aluminum panels per square meter, which not only increases building load but also poses safety risks of detachment